Optone Switch OPT-IES1038MP, 8 x FE PoE, 2 x GE SFP, IP40, managed, industrial OPT-IES1038MP
Interface
8 x Ethernet+PoE port (RJ45) 10/100Base-Tx
2 x Optical port (SFP) 1000Base-Fx
1 x Console port (RJ45)
Optical Port
Available for 1310nm and 1550nm Single mode, 850nm Multi
mode
Transfer Distance: up to 120km
Connectors: SFP
Fiber core: 9/125μm on single-mode fiber, 50/125μm and
62.5μm on multi-mode fiber
Ethernet Port
Available speed: force 10Mbps, force 100Mbps and auto-
detective 10/100Mbps Full-Duplex and Half-Duplex auto-
negotiation
Connectors: RJ-45 Connector; MDI/MDI-X connection auto-
sensing
Standard
IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX/FX)
IEEE802.3ab (1000Base-T)
IEEE802.3z (1000Base-SX/LX/CX/T)
IEEE802.3x (Flow control)
IEEE802.1Q (VLAN)
IEEE802.1p (Class of Service)
IEEE 802.1w (RSTP)
SNMP v1/v2c (Simple Network Management Protocol)
IEEE802.3af (Power over Ethernet Standard)
IEEE802.3at (Power over Ethernet Enhancements Standard)
Switch Properties
MAC Table: 8K
Packet Buffer: 1Mbit
Switching Delay: <5μs
LED Indicators
Power Status, Speed Status, FX Link/Act, TX Link/Act
PoE Specification
Power Output: PoE 48V DC
PoE Power Supply type: End-Span
Power Pin Assignment: 1/2(+), 3/6(-)
PoE Power Budget: Each port provides max 30W feed power
Power Requirement
Input: 48VDC
Consumption:MAX 6.6W(no PD), 246.6W(full PD)
Reverse Connection Protection: Support
Redundancy Protection: Support
Dual Power: Support
Physical Characteristics
Housing: Metal enclosure
Protection Class: IP40
Dimensions: 53 x 165 x 145mm
Weight: 0.9kg
Installation: DIN-Rail or Panel mounting