(Works also as stand alone AP)

Ubiquiti PowerBeam M5 400 ISO - PBE-M5-400-ISO

The PowerBeam M5 400 ISO is an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation.

Ubiquiti PBE-M5-400-ISO Key Features

    Frequency - 5 GHz
    Throughput - 150+ Mbps
    Range - 25+ km
    Gain 25 dBi
    Dish Reflector 400 mm
    Plug and Play Installation

Incorporating advanced engineering with proprietary airMAX technology, the Ubiquiti PowerBeam M5 400 ISO - PBE-M5-400-ISO is ideal for deployments requiring maximum performance and RF isolation.

The Ubiquiti PowerBeam M5 400 ISO - PBE-M5-400-ISO directs RF energyin a tighter beamwidth, and itsintegrated isolator design improvesRF isolation to spatially filter outinterference. With its combinationof focused beam directivity and RFisolation, the PowerBeam ISO blocksnoise to improve noise immunity.This is especially important in an areacrowded with other RF signals of thesame or similar frequency.

Hardware Overview

Superior RF Isolation

Compare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.
 
Ubiquiti PBE-M5-400-ISO - Technical Specifications
General

    Processor Specs Atheros MIPS 74Kc, 560 MHz
    Memory 64 MB DDR2, 8 MB Flash
    Networking Interface (1) 10/100/1000 Ethernet Port
    Wireless Approvals FCC, IC, CE
    RoHS Compliance Yes

Physical/Electrical/Environmental

    Dimensions 459 x 459 x 261 mm (18.07 x 18.07 x 10.28")
    Weight 3.22 kg (7.10 lb)
    Power Supply 24V, 0.5A Gigabit PoE
    Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
    Supported Voltage Range 18-26VDC
    Max. Power Consumption 8W
    Gain 25 dBi
    Operating Frequency
    Worldwide - 5170 - 5875 MHz
    USA -5725 - 5850 MHz
    Wind Loading 390 N @ 200 km/h (88 lbf @ 125 mph)
    Wind Survivability 200 km/h (125 mph)
    LEDs (1) Power, (1) LAN, (4) WLAN
    Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
    Channel Sizes 5/8/10/20/30/40 MHz
    Polarization Dual Linear
    Enclosure Outdoor UV Stabilized Plastic
    Mounting Pole-Mount Kit Included
    ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
    Operating Temperature -40 to 70° C (-40 to 158° F)
    Operating Humidity 5 to 95% Non-Condensing
    Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
    Vibration Test IEC 68-2-6
    Temperature Shock Test IEC 68-2-14
    UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
    Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5