(Works also as stand alone AP)

The Ubiquiti NanoStation M5 is a hi-performance, low cost and extremely versatile point-to-point wireless bridge. The NSM5 comes with a newly redesigned, sleek and elegant form-factors along with integrated Ubiquiti AirMax (MIMO TDMA Protocol) Technology.

Ubiquiti NSM5 Key Features:

    Frequency 5 GHz
    Throughput 150+ Mbps
    Range 15+ km

The Ubiquiti NanoStation M5 features 150+ Mbps real outdoor throughput and up to 15km+ range, with 2x2 MIMO technology, meaning the NSM5 links significantly faster and farther than ever before

Next-Gen Antenna Design

New antenna array designs featuring 16dBi dual-polarity gain at 5GHz. Optimized cross-polarity isolation and in a compact form-factor.

Integrated AirMax Technology

Unlike standard WiFi protocol, Ubiquiti's Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.

This "time slot" method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability compared to all other outdoor systems in its class.

    Intelligent QoS - Priority is given to voice/video for seamless access.
    Scalability - High capacity and scalability.
    Long Distance - Capable of high speed 15km+ links.
    Latency - Multiple features dramatically reduce noise.

Dual Ethernet Connectivity

The New Ubiquiti NanoStation M5 provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent PoE

Remote hardware reset circuitry of Ubiquiti NanoStation M5 allows for device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation M5 can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter. Remote reset is an additional option. Ubiquiti NanoStation M5 comes standard as 24V without remote reset.

AirOS V

Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Please visit the Ubiquiti Firmware page for the latest Firmware upgrades
Ubiquiti NanoStation M5 Technical Specifications
System Information

    Processor Specs: Atheros MIPS 24KC, 400MHz
    Memory Information: 32MB SDRAM, 8MB Flash
    Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet

RF

    Operating Frequency: 5470 - 5825 MHz
    Tx Output Power 11a:
        27 dBm @ 1-24 Mbps
        25 dBm @ 36 Mbps
        23 dBm @ 48 Mbps
        22 dBm @ 54 Mbps
    Tx Output Power 11n AirMax:
        27 dbm @ MCS0
        27 dbm @ MCS1
        27 dbm @ MCS2
        27 dbm @ MCS3
        26 dbm @ MCS4
        24 dbm @ MCS5
        22 dbm @ MCS6
        21 dbm @ MCS7
        27 dbm @ MCS8
        27 dbm @ MCS9
        27 dbm @ MCS10
        27 dbm @ MCS11
        26 dbm @ MCS12
        24 dbm @ MCS13
        22 dbm @ MCS14
        21 dbm @ MCS15
    Rx Sensitivity 11a:
        -94 dBm @ 1-24 Mbps
        -80 dBm @ 36 Mbps
        -77 dBm @ 48 Mbps
        -75 dBm @ 54 Mbps
    Rx Sensitivity 11n AirMax:
        -96 dbm @ MCS0
        -95 dbm @ MCS1
        -92 dbm @ MCS2
        -90 dbm @ MCS3
        -86 dbm @ MCS4
        -83 dbm @ MCS5
        -77 dbm @ MCS6
        -74 dbm @ MCS7
        -95 dbm @ MCS8
        -93 dbm @ MCS9
        -90 dbm @ MCS10
        -87 dbm @ MCS11
        -84 dbm @ MCS12
        -79 dbm @ MCS13
        -78 dbm @ MCS14
        -75 dbm @ MCS15

Antenna

    Antenna Gain: 14.6 - 16.1 dBi
    Cross-pol Isolation: 22 dB minimum
    Polarization: Dual Linear
    Max VSWR: 1.6:1
    Beamwidth: 45 deg. (H-pol) / 41 deg (V-pol) / 15 deg (Elevation)

Power

    Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
    Power Supply (included): 24V, 0.5A POE
    Max Power Consumption: 8 Watts

Physical

    Enclosure Characteristics: Outdoor UV Stabilized Plastic
    Mounting Kit: Pole straps included
    Operating Temperature: -30C to 75C
    Operating Humidity: 5 to 95% Condensing
    Shock and Vibration: ETSI300-019-1.4
    Dimensions: 294 x 31 x 80 mm
    Weight: 0.4 kg

Regulatory & Compliance

    Wireless Approvals: FCC Part 15.247, IC RS210, CE
    RoHS Compliance: Yes

RF Elements Nanobracket

The RF Elements NanoBracket is a design made of durable UV-stabilized ABS plastic and allows easy and quick installation of the device on a wall, pole (max 52mm) or a console. Installation of the RF Elements NanoBracket is really simple. The holder is mounted in the closest possible position to the center of gravity of the mounted device which makes the construction more stable. The holder color matches perfectly with the color of the NanoStation and StationBox, therefore the construction looks really compact.