(Works also as stand alone AP)

The Ubiquiti NanoStation M2 MIMO features 2x2 MIMO technology and 150+ Mbps real outdoor throughput up to 15km+ range meaning the Nanostation M2 allows for links that are significantly faster and farther than ever before.

Ubiquiti NanoStation M2 Features

    Frequency - 2.4 GHz
    Throughput - 150+ Mbps
    Range - 13+ km
    Product Model Number: NSM2

The low cost, hi-performance, and small form factor of the NanoStation M2 makes them extremely versatile and ideal in several different applications.

Next-Gen Antenna Design

New antenna array designs featuring 11dBi dual-polarity 11dBi at 2.4GHz. Optimized cross-polarity isolation and in a compact form-factor.

Integrated AirMax Technology

Unlike standard WiFi protocol, Ubiquiti's Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.

This "time slot" method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability compared to all other outdoor systems in its class.

    Intelligent QoS - Priority is given to voice/video for seamless access.
    Scalability - High capacity and scalability.
    Latency - Multiple features dramatically reduce noise.

Dual Ethernet Connectivity

The New Ubiquiti NanoStation M2 provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent PoE

Remote hardware reset circuitry of Ubiquiti NanoStation M2 allows for device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation M2 can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter. Remote reset is an additional option. Ubiquiti NanoStation M2 comes standard as 24V without remote reset.

AirOS V

Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Please visit the Ubiquiti Firmware page for the latest Firmware upgrades

Ubiquiti NanoStation M2 Technical Specifications
System Information

    Processor Specs: Atheros MIPS 24KC, 400MHz
    Memory Information: 32MB SDRAM, 8MB Flash
    Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet

RF

     Operating Frequency: 2412-2462 MHz
    Tx Output Power 11b/g:
        28 dBm @ 1-24 Mbps
        26 dBm @ 36 Mbps
        25 dBm @ 48 Mbps
        24 dBm @ 54 Mbps
    Tx Output Power 11n AirMax:
        28 dbm @ MCS0
        28 dbm @ MCS1
        28 dbm @ MCS2
        28 dbm @ MCS3
        27 dbm @ MCS4
        25 dbm @ MCS5
        23 dbm @ MCS6
        22 dbm @ MCS7
        28 dbm @ MCS8
        28 dbm @ MCS9
        28 dbm @ MCS10
        28 dbm @ MCS11
        27 dbm @ MCS12
        25 dbm @ MCS13
        23 dbm @ MCS14
        22 dbm @ MCS15
    Rx Sensitivity 11b/g:
        -97 dBm @ 1-24 Mbps
        -80 dBm @ 36 Mbps
        -77 dBm @ 48 Mbps
        -75 dBm @ 54 Mbps
    Rx Sensitivity 11n AirMax:
        -96 dbm @ MCS0
        -95 dbm @ MCS1
        -92 dbm @ MCS2
        -90 dbm @ MCS3
        -86 dbm @ MCS4
        -83 dbm @ MCS5
        -77 dbm @ MCS6
        -74 dbm @ MCS7
        -95 dbm @ MCS8
        -93 dbm @ MCS9
        -90 dbm @ MCS10
        -87 dbm @ MCS11
        -84 dbm @ MCS12
        -79 dbm @ MCS13
        -78 dbm @ MCS14
        -75 dbm @ MCS15

Antenna

    Antenna Gain: 10.4 - 11.2 dBi
    Cross-pol Isolation: 23 dB minimum
    Polarization: Dual Linear
    Max VSWR: 1.6:1
    Beamwidth: 55 deg. (H-pol) / 53 deg (V-pol) / 27 deg (Elevation)

Power

    Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
    Power Supply (included): 24V, 0.5A POE
    Max Power Consumption: 8 Watts

Physical

    Enclosure Characteristics: Outdoor UV Stabilized Plastic
    Mounting Kit: Pole straps included
    Operating Temperature: -30C to 75C
    Operating Humidity: 5 to 95% Condensing
    Shock and Vibration: ETSI300-019-1.4
    Dimensions: 294 x 31 x 80 mm
    Weight: 0.4 kg

Regulatory & Compliance

    Wireless Approvals: FCC Part 15.247, IC RS210, CE
    RoHS Compliance: Yes

RF Elements Nanobracket

The RF Elements NanoBracket is an original design made of durable UV-stabilized ABS plastic and allows easy and quick installation of the device on a wall, pole (max 52mm) or a console. Installation of the RF Elements NanoBracket is really simple. The holder is mounted in the closest possible position to the center of gravity of the mounted device which makes the construction more stable. The color of the holder matches perfectly with the color of the NanoStation and StationBox, therefore the construction looks really compact