Roger PRT62EM outdoor Proximity Reader EM 125 kHz
Each PRT62EM series reader can be used as a universal identification point connected to the access controller or configured for autonomous work, as a simple access controller for a single door.
In the first case, the reader’s functionality is limited only to reading an identifier (card/PIN) and sending data to an external controller, which takes further action. In case of work in a standalone mode, PRT62EM terminals can independently supervise a single door using data entered in the process of their configuration.
Features
-
Power supply 12VDC
-
EM 125 kHz cards
-
programmable data output format: Wiegand 26-66bit, Magstripe (Clock and data), RS232, RACS (Roger)
-
various ways of PIN and keypad codes transmission
-
LED and Buzzer controlled through separate inputs
-
outdoor installation (except PRT42EM)
-
can be used for EMC-4 card programming (free of charge RARC software is required)
-
programmed manually or from PC
-
may operate as an offline standalone access controller
-
120 indexed users
-
authentication: Card and/or PIN
-
event log for 1024 transactions
-
built-in programmable 1.5 A/30 V relay output
-
two NO/NC inputs
-
two transistor outputs
-
operation with XM-2 I/O extension module
-
possible connection of the external PRT series reader (two way door control)
-
tamper
-
average current consumption 45 mA
-
reading distance up to 12 cm
-
dimensions: 100.0 x 40.0 x 25.0 mm (height x width x thickness)
-
weight: ≈100.0 g
-
CE mark
-
environmental conditions of operation:
-
temperature from -25°C to +60°C
-
humidity from 10% to 95%